Quick verdict
For Husqvarna and its sibling brands the genuine Husqvarna 532132801 drive belt is the safest pick. It is an OEM 1/2 by 53-1/2 inch belt that supersedes older part 132801 and fits a long list of Husqvarna, Craftsman, Poulan and AYP tillers, so you know the fit is right before it ships.
Husqvarna 532132801 Tiller Drive Belt
This is a genuine Husqvarna OEM belt, part 532132801, measuring 1/2 by 53-1/2 inches, and it supersedes the older 132801. Its real strength is breadth of fit, covering dozens of Husqvarna models plus Craftsman, Poulan, Poulan Pro, AYP and Roper units that use the same part. Choosing OEM takes the guesswork out of length and width matching.
Check price on Amazon âThe best tiller belt picks compared by part number and fit. OEM Husqvarna, Earthquake, Troy-Bilt and Victory drive belts, so you match the length and get
Why you should trust this guide
A tiller drive belt is a part you only think about when your machine stops driving, and by then you want the right belt fast. The catch is that belts are sized to specific pulleys, so length and width must match exactly or the belt will slip, squeal or refuse to seat. My aim here is to point you to the correct belt for your tiller by brand and part number rather than a generic loop that almost fits.
I do not sell belts and I gain nothing from your choice. Every pick below is judged on the stated part numbers, belt dimensions and compatibility lists the makers publish, then grouped by the tillers they serve. Where a listing is an aftermarket part with a broad model list, I say so and stress the importance of confirming the number stamped on your old belt.
How we evaluated
My first and heaviest filter is fitment, because a belt that is even slightly off in length is a wasted purchase. I read the cross-referenced part numbers, the stated width and length and the compatible models for each belt, then grouped them by brand so Husqvarna, Earthquake, Troy-Bilt and Victory owners are never looking at the wrong loop. I also noted single belts versus two-belt drive sets.
After fit I weighed build claims and whether the part is OEM or aftermarket, favoring genuine parts where certainty matters most and durable high-tensile aftermarket belts where value counts. I did not install these belts or run a tiller with them. Instead I compared the published dimensions and compatibility data, and I flag every listing that requires you to verify the part number before ordering.
What to look for
- The exact part number stamped on your old belt or listed in your tiller manual
- Belt width and length in inches, since both must match the pulleys precisely
- Whether the belt is genuine OEM or an aftermarket equivalent, and how sure you need to be
- Forward-drive versus other belt positions, so you replace the correct one
- Whether your machine uses one belt or a two-belt drive set
- Material claims like high tensile strength for durability in outdoor service
- How broad the compatibility list is, since a wide list means verify your fit carefully
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| Husqvarna 532132801 Tiller Drive Belt | Best Overall | Check price | |
| TOSRWGLL 22773 Drive Belt Compatible | Best Value | Check price | |
| YOIASUGH GW | Best Premium | Check price | |
| Garden Tiller Forward Drive Belt 3/8" x 23.75" Compatible | Best Budget | Check price | |
| loosoo | Also Great | Check price |
The picks, reviewed
Husqvarna 532132801 Tiller Drive Belt
This is a genuine Husqvarna OEM belt, part 532132801, measuring 1/2 by 53-1/2 inches, and it supersedes the older 132801. Its real strength is breadth of fit, covering dozens of Husqvarna models plus Craftsman, Poulan, Poulan Pro, AYP and Roper units that use the same part. Choosing OEM takes the guesswork out of length and width matching.
Reasons to buy
- · Drive Belt
- · Genuine Husqvarna Part # 532132801
- · Supercedes/Replaces Old Part # 132801
- · Fits Specific Husqvarna 500HRTT, 500RTT, 550CRTH, 550CRTT, 600CRT, 650BRTTA, 650CRTA, 65
- · Also Fits Other Brands Produced by Husqvarna that Require this Part # (Sears Craftsman,
Reasons to avoid
- OEM belts typically cost more than aftermarket equivalents
- Only correct for machines that call for part 532132801, so verify yours
TOSRWGLL 22773 Drive Belt Compatible
The TOSRWGLL 22773 is a 26-inch belt aimed at Earthquake Victory rear-tine tillers, including models 24598, 29702 and 29409, and it also fits the CountyLine CRT 20969. It is described as high tensile strength for durable outdoor life. That makes it the value route for Earthquake and CountyLine owners who do not run a Husqvarna.
Reasons to buy
- ăFit Foră26" drive belt compatible with Earthquake Victory rear tine tiller 24598,29702,29
- ăPart Numberă22773 tiller belt fit for CountyLine CRT 20969 tiller part number: 31315
- ăPremium QualityăTiller drive belt is made of high quality material for mooth and durable,
- ăEasy to InstallăTiller forward belt can be easily installed and replaced,referring to dia
- ăAfter-Sales Guaranteeă We are committed to excellent quality and the best service. If you
Reasons to avoid
- Aftermarket part, so confirm the 22773 number matches your machine
- Fits a narrower model list than the OEM Husqvarna belt
YOIASUGH GW
This YOIASUGH set is the premium pick for Troy-Bilt and Cub Cadet owners because it includes both forward-drive belts, a 1/2 by 25.5 inch and a 3/8 by 29 inch, replacing GW-1916657 and GW-1916658. It fits Super Bronco, Bronco CRT, FRT and ProLine CRT tillers plus many Craftsman and MTD units. Getting both belts together is convenient for a full drive refresh.
Reasons to buy
- Model:954-04091, 754-04091, GW-1916658, 1916658; Cub Cadet 954-04091, 754-04091, GW-191665
- Compatible models include Craftsman 24729930, 247299301, 24729931, Yard Machines 21AA40M77
- Width 1/2", Length 25.5" and Width 3/8 ", Length 29"
- Fits Models: Troy-Bilt Super Bronco, FRT, CRT, Bronco CRT, and ProLine CRT Roto-Tillers
Reasons to avoid
- Extensive model list makes verifying your exact fit more important
- Two-belt set may be more than you need if only one belt failed
Garden Tiller Forward Drive Belt 3/8" x 23.75" Compatible
This budget belt is a single 3/8 by 23.75 inch forward-drive belt for the Troy-Bilt Tuffy rear-tine tiller, replacing part numbers 754-04089 and GW-55037. It keeps things simple and cheap for that specific machine. The plain listing states the application and dimensions clearly, which helps you confirm fit.
Reasons to buy
- Belt Application: Forward Drive ; Belt Top Width 3/8" Length 23.75"
- This part Compatible with: 754-04089 GW-55037 55037 954-04089
- Compatible with Troy-Bilt Tuffy Rear-Tine Tillers, 2005
- We have Good quality,Best Service,Easy Return!
Reasons to avoid
- Very limited fitment, essentially the Troy-Bilt Tuffy line
- Sparse listing with few details beyond dimensions and part numbers
loosoo
The loosoo 32993 belt, also cross-referenced as 4L670, serves Victory and Earthquake rear-tine tillers with the 212cc Viper engine, including models 29409, 33970 and 39381 across several model years. It is described as high tensile and toughness rated for extended outdoor life. That makes it the match for newer Victory and Benchmark machines.
Reasons to buy
- ăCOMPATIBILITYăCompatible with Models: 29409 VICTORY Rear Tine Tiller with 212cc Viper Eng
- ăREPLACE PART NUMBERă32993, 4L670.
- ăEASY INSTALLATIONăThis belt is easy to install, refer to the schematic diagram and replac
- ăPREMIUM QUALITYă This belt is made of high quality material for mooth and durable, with h
- ăEXCELLENT SERVICEăWe provide carefree REPLACEMENT, you can buy it with confidence. If you
Reasons to avoid
- Fitment is tied to specific engine and model-year combinations, so check carefully
- Aftermarket belt, so verify the 32993 part number before ordering
What to look for
Part number
Match the number on your old belt or in the manual, since belts are sized to specific pulleys.
Dimensions
Confirm both the width and length in inches so the belt seats and tensions correctly.
OEM or aftermarket
Genuine parts give certainty of fit, while durable aftermarket belts offer value if the number matches.
Belt position
Verify you are buying the forward-drive belt or whichever position actually failed on your tiller.
One belt or a set
Some tillers use a single belt and others a two-belt drive set, so buy what your machine needs.
Our verdict
For Husqvarna and its sibling brands the genuine Husqvarna 532132801 drive belt is the safest pick. It is an OEM 1/2 by 53-1/2 inch belt that supersedes older part 132801 and fits a long list of Husqvarna, Craftsman, Poulan and AYP tillers, so you know the fit is right before it ships.
FAQs
Read the part number off your old belt or find it in the manual, then match it to the cross-reference list. Confirm the width and length match as well.
Yes, if the part number and dimensions match. Aftermarket belts can offer good value, though OEM parts like the Husqvarna 532132801 give the most certainty of fit.
The belt has to wrap the drive and driven pulleys with the correct tension. A belt that is too long slips and one that is too short will not seat, so exact length is essential.
It depends on the model. Some Troy-Bilt and Cub Cadet drives use two belts of different sizes, which is why sets like the GW-1916657 include both.
Signs include slipping under load, squealing, visible cracks or glazing, or the tines not driving when engaged. A worn belt is a common and inexpensive fix.