Quick verdict
For King Kutter TG48 owners the Pro Parts Place 36-tine set is the clean answer. It replaces part 505036 with a full complement of 18 left and 18 right tines, so you rebuild both rotors in one order rather than mixing worn and new blades that would wear unevenly.
Pro Parts Place
This Pro Parts Place set is built for the King Kutter TG48 and replaces part 505036 with 36 total tines, 18 left and 18 right. Buying the full set means both rotors get fresh, matched blades in one go rather than a patchwork of old and new. That balanced replacement keeps the tilling action even and reduces uneven strain on the gearbox.
Check price on Amazon →The best tiller replacement blades compared by fit and set completeness. Full tine sets for King Kutter, Mantis and Troy-Bilt, so you rebuild both rotors and
Why you should trust this guide
Tiller tines are one of the least glamorous parts you will ever buy and one of the easiest to get wrong. They are cut and drilled for specific machines, so ordering by picture instead of part number is how people end up with a box of blades that will not bolt on. My aim here is to steer you to the correct set for your exact tiller, whether that is a King Kutter, a Mantis or a Troy-Bilt.
I have no stake in which set you pick and I do not favor a seller. Each recommendation is built from the stated part numbers, tine counts and fitment lists the makers publish, then organized by the machines they serve. Where a listing warns that stock photos may differ or that fit should be verified, I pass that caution straight along rather than glossing over it.
How we evaluated
Fitment is the whole ballgame with tines, so it is my first and heaviest criterion. I read the cross-referenced part numbers and compatible models for each set and grouped them by machine, keeping King Kutter, Mantis and Troy-Bilt options clearly separate so you never compare the wrong blades. I also weighed whether a set is a full rotor complement or a small top-up pack.
From there I looked at build and completeness, favoring hardened steel and sets that include mounting hardware, since a full kit turns a fiddly job into a straightforward one. I did not mount these tines on a tiller or run them through soil. Instead I compared the published specifications, hole geometry and fitment data, and I flag every listing that tells you to verify fit before ordering.
What to look for
- Exact part-number and model match to your tiller, checked before you order anything
- Left and right tine counts, since rotors need the correct mix in the right quantity
- Whether the set is a full rotor complement or a small top-up pack of a few tines
- Hardened steel construction for longer life in rocky or heavy soil
- Included mounting hardware like cap screws, nuts and lock washers for a clean install
- Stated hole size and center-to-center geometry so you can confirm a precise fit
- Any warning that stock images differ from the actual part, which means verify carefully
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| Pro Parts Place | Best Overall | Check price | |
| Upgrade 1622 Power Tiller Tines Compatible | Best Value | Check price | |
| Best Premium | Check price | ||
| Pro Parts Place | Best Budget | Check price | |
| 1901118 Replacement Troy | Also Great | Check price |
The picks, reviewed
Pro Parts Place
This Pro Parts Place set is built for the King Kutter TG48 and replaces part 505036 with 36 total tines, 18 left and 18 right. Buying the full set means both rotors get fresh, matched blades in one go rather than a patchwork of old and new. That balanced replacement keeps the tilling action even and reduces uneven strain on the gearbox.
Reasons to buy
- Replacement set for King Kutter TG48
- 36 Total tines, 18 Right & 18 Left
- Proven Pro Parts Place Quality
Reasons to avoid
- Fits only the King Kutter TG48, so confirm your model
- A full 36-piece set is more than you need if only a few tines are worn
Upgrade 1622 Power Tiller Tines Compatible
This value pick covers Mantis tillers and cultivators, cross-referencing part numbers 1622, 7222, 7260 and several others in that family. It is rated to till up to 10 inches deep and 9 inches wide and can even reverse-till to a shallower depth. It ships as a two-tine pack, which suits topping up a small cultivator rather than a full rebuild.
Reasons to buy
- Replacement part number: 1622, 7222, 7225, 7260, 7261, 7262, 7920, 7924, 7940
- The package includes: 2*1622 Power Tiller Tines, the size of the product is subject to the
- Compatible with Mantis Tiller/Cultivators, Our product is designed to till up to 10 inches
- This product is also suitable for shallow tillage, it can also be reverse tilled to a dept
- Also helps you to loosen and treat the soil efficiently, therefore breaking it up for bett
Reasons to avoid
- Not compatible with Mantis XP, 3550 or 3558 tillers, so check first
- Two tines only, not a complete rotor set
This hardened-steel set fits Troy-Bilt Horse and Pony roto tillers, replacing part 1901118, and the maker stresses the steel is chosen for extended life. It comes as a 16-piece set of right and left tines for a fuller rebuild. The listing is upfront that OEM numbers are for reference and you should verify fit before ordering.
Reasons to buy
- One New Aftermarket Replacement Tiller Tine Set
- Hardened Steel for Extended Life
- Replaces Part Numbers: 1901118
- OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering.
- Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual P
Reasons to avoid
- Stock images may differ from the actual part, so confirm carefully
- Hardware is not clearly listed, so you may reuse existing bolts
Pro Parts Place
The budget King Kutter option is the larger TG60 set, replacing part 505042 with 42 total tines, 21 left and 21 right. It is the correct full rebuild for the wider TG60 rotor rather than the TG48. As with the other Pro Parts Place set, replacing everything at once keeps the tines matched and the tilling balanced.
Reasons to buy
- Complete set for King Kutter TG60 Tiller
- 42 Total tines, 21 Left & 21 Right
- Proven Pro Parts Place Quality
Reasons to avoid
- Sized specifically for the TG60, not interchangeable with the TG48
- A complete 42-piece set is overkill for replacing a few damaged tines
1901118 Replacement Troy
This Troy-Bilt Horse and Pony set is the standout for a complete swap because it ships with the hardware, 32 cap screws, 32 nuts and 32 lock washers alongside 8 left and 8 right tines. It also lists exact geometry, a 7/16 inch hole and specific center measurements, so you can verify fit precisely. That included hardware makes the install genuinely turnkey.
Reasons to buy
- One New Aftermarket Replacement Tiller Tine Set
- 8 Left Hand Tines, 8 Right Hand Tines
- 32 Cap Screws, 32 Nuts, 32 Lock Washers
- Hole Size: 7/16"; Top Center to Bottom Center: 3-1/8"; Center to Center Bottom Two Holes:
- Replaces Part Numbers: 10802, 129259, 129359, 1569, 1570, 1901118, 370-270
Reasons to avoid
- A 16-tine set may be a partial complement for larger Horse rotors
- Fits the Troy-Bilt Horse and Pony line only, so match part numbers
What to look for
Machine match
Match the part number and model to your tiller exactly, since tines are cut for specific machines.
Full set or top-up
Decide whether you need a complete rotor rebuild or just a few replacement tines.
Left and right count
Confirm the set has the correct mix of left and right tines for balanced tilling.
Steel quality
Hardened steel lasts longer in rocky, compacted or heavy clay soil.
Included hardware
Sets that ship with screws, nuts and washers make the swap turnkey instead of a scavenger hunt.
Our verdict
For King Kutter TG48 owners the Pro Parts Place 36-tine set is the clean answer. It replaces part 505036 with a full complement of 18 left and 18 right tines, so you rebuild both rotors in one order rather than mixing worn and new blades that would wear unevenly.
FAQs
Use your tiller's model and the OEM part number, then match it to the cross-reference list in the tine listing. Do not order by the photo alone.
Replacing a full set at once keeps the tilling even and avoids mixing worn and new blades. For minor damage a small top-up pack can be enough.
Some do and some do not. The Troy-Bilt 1901118 set with hardware includes screws, nuts and washers, while others expect you to reuse your existing bolts.
They are mirror images that curve in opposite directions so the rotor pulls soil correctly. A balanced rebuild needs the right count of each, which is why sets specify both.
Because stock images and reference part numbers can differ from what actually fits your machine. Checking hole size and model compatibility avoids buying tines that will not bolt on.