Quick verdict
If you need to replace a broken discharge chute, the 762222MA chute assembly for Briggs & Stratton, Craftsman, and Murray throwers is the pick to check first. Its long compatibility list covers many two-stage models, so match your part number before buying.
This 762222MA discharge chute assembly is built as a direct replacement for a long list of Briggs & Stratton, Craftsman, and Murray two-stage throwers, covering part numbers like 76221, 325847, and 325864. The listing describes a thickened, reinforced design for cold resistance and durability. It is the straightforward choice when only the chute bucket itself is cracked or damaged.
Check price on Amazon →The best snow blower chute replacements compared: OEM-compatible chute assemblies and flanges for Murray, Craftsman, Husqvarna, MTD, and Troy-Bilt throwers.
Why you should trust this guide
Snow blower chutes are not glamorous, but a cracked chute or a seized rotation gear can sideline a machine mid-storm. I built this guide by reading the actual Amazon listings, cataloging the part numbers each item replaces, and grouping them by the brand families they fit. That is the information that actually decides whether a chute will bolt onto your thrower.
I have not installed each of these parts myself, so I do not claim field results I did not gather. What I can do is lay out exactly which replacement covers which machines and where the honest limitations are, especially since a chute that fits a Murray will not fit an MTD. My goal is to steer you to the right part number quickly.
How we evaluated
My main evaluation criterion is compatibility, because a snow blower chute is a fitment part first and a durability item second. I read each listing’s replaces-part-number field and compatible-model list, then flagged which brand family it serves: Murray and Craftsman, Husqvarna and Poulan, or MTD and Troy-Bilt. Buying the wrong family is the most common mistake here.
After fitment, I looked at construction claims like metal reinforcement and cold resistance, and whether the item is a full chute assembly, a chute-plus-gear kit, or just a mounting flange. I did not invent any dimensions or materials beyond what the listings state, so where a detail was missing I simply left it out.
What to look for
- Your exact part number. Find the OEM number stamped on your old chute or in your manual and match it to the replaces-part-number list.
- Brand family. Murray, Craftsman, Husqvarna, and MTD chutes are not interchangeable, so buy within your machine’s family.
- Assembly versus flange. Decide whether you need the full chute bucket, the chute plus rotation gear, or only the mounting flange.
- Rotation hardware. If your chute no longer swivels, choose a kit that includes the worm gear and bracket.
- Material and reinforcement. Look for reinforced or metal-topped designs that resist cracking in cold weather.
- Installation notes. Some listings include tips like securing bolts during removal; a clean bolt-on job avoids stripped hardware.
- Included quantity. A multi-pack of flanges gives you spares for a part that tends to wear at the same spot.
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| Best Overall | Check price | ||
| Snow Blower Chute Cleaning | Best Value | Check price | |
| 762222MA Chute Assembly Kit w/Worm Bracket & Chute Rotater W | Best Premium | Check price | |
| 585056901 Snow Blower Chute Compatible | Best Budget | Check price | |
| 3 Pack 731 | Also Great | Check price |
The picks, reviewed
This 762222MA discharge chute assembly is built as a direct replacement for a long list of Briggs & Stratton, Craftsman, and Murray two-stage throwers, covering part numbers like 76221, 325847, and 325864. The listing describes a thickened, reinforced design for cold resistance and durability. It is the straightforward choice when only the chute bucket itself is cracked or damaged.
Reasons to buy
- NOTE!!! Please check if it is a LIZEWEI / XINKE-USA store before purchasing!!!! If it is n
- Replaces Part Number 76221, 76221MA, 762222, 762222MA, 325847MA, 325847, 325864, 307672
- Also Fits Models: MT334234, 34234MA, 3MT334234MA, 325847MA, MT325847, MT325847MA, 762221,
- Also Fits Models: 536886350, 536881260, 536886260, 536888600, 536886220, 536886622, 536886
- Product Advantages: This product maintains stable operation even under harsh weather condi
Reasons to avoid
- The seller note warns to confirm you are buying from the correct store
- You must verify your exact part number, since fitment is model-specific
Snow Blower Chute Cleaning
This is a chute cleaning tool kit rather than a chute assembly, pairing a reinforced snow shovel with an installation clip that attaches to most snow blower chutes. It is meant for clearing clogs safely without dismantling the machine, and the listing stresses checking the size chart for fit. I include it as a low-cost accessory for anyone whose chute works but keeps jamming.
Reasons to buy
- [COMPLETE REPLACEMENT KIT] This small snow cleaning machine accessories kit contains snow
- [ROBUST CONSTRUCTION] shovel head with reinforced connector resists bending and handles th
- [ ATTACHMENT] The installation clip secures the to most snow blower chutes quick -site cle
- [-STYLE TESTED] Built and tested to meet -style tolerances to support consistent fit and f
- [SIZE REMINDER] PLEASE YOUR SIZE CHART to confirm compatibility with your snow thrower chu
Reasons to avoid
- This is a clog-clearing tool, not a replacement chute
- Fit varies, so confirm compatibility against the size chart
762222MA Chute Assembly Kit w/Worm Bracket & Chute Rotater W
This 762222MA kit bundles the chute assembly with a worm gear bracket and chute rotator wormgear, so it addresses both a damaged chute and worn rotation hardware in one purchase. The listing describes metal-reinforced top plates for durability and restored side-to-side aiming after installation. It suits owners whose chute will no longer swivel properly.
Reasons to buy
- Replacement Part Number: 762222MA, 762222, 325864, 76221MA, 325847MA, 325847, 307672, 7622
- Compatible with BS Murray Craftsman Snow Throwers 536888600, C950-52005-0, 536888400, 5368
- Compatible with Murray Craftsman Snow Throwers 536884320, 536884560, 536884561, 536884562,
- The Snow Discharge Chute Assembly Is Constructed From Premium Materials, With The Top Rein
- The Worm Gear Bracket Within The Snow Chute Assembly Kit Serves Secure The Snow Discharge
Reasons to avoid
- Costs more than the bare chute since it includes rotation hardware
- Still requires matching your specific model and part number
585056901 Snow Blower Chute Compatible
This 585056901 chute is aimed at Husqvarna, Craftsman, and Poulan throwers, replacing part numbers like 532175322 and 532442438 across many 924, 5524, and ST-series models. The listing notes a compact design and simple bolt-on installation with a tip to secure the bolt while removing the nut. It is the pick for owners in the Husqvarna and Poulan family.
Reasons to buy
- Replaces Part Number: 585056901, 175322, 442438, 532175322, 532442438, 056901
- Compatible with Husqvarna 924 SBE, 927 SBEXP, 5524 SE, 5524 SEB, 5524 ST (HU5524STA), 5524
- Compatible with Poulan PR6R24, PR1330ES, PP1850ES, PP208E24, PP265E27, PP291EPS27, PR14527
- Constructed from high-quality materials, featuring a compact design for long-lasting durab
- Installation is simple. When removing bolts, secure the bolt at the opening to prevent it
Reasons to avoid
- Fits a different brand family than the Murray and Craftsman assemblies here
- Confirm your model appears on the compatibility list before ordering
3 Pack 731
This is a three-pack of 731-04869 chute flanges for MTD, Craftsman, and Troy-Bilt machines, replacing 731-04869A across many Yard Machines and Storm-series models. Because it is the flange rather than the full chute, it targets the mounting ring where the chute meets the housing. Getting three pieces gives you spares for a common wear point.
Reasons to buy
- Part number: 731-04869A, 73104869A, 731-04869
- Compatible with MTD models: 31AE6AHE722 (2005), 31AE6BHE722 (2005), 31AE6GLF722 (2005), 31
- Compatible With: Craftsman: 2 X 22 inch, 2 X 24 inch, 2 X 28 inch, SB400, SB410; Huskee: 2
- Compatible With model: Columbia: 10528PC, 10530CA, 65024PC, 85026PC; Estate: 600H; Remingt
- Compatible With Craftsman, Husqvarna, MTD, Yard Machines, Yard Man, & Troy-Bilt Machines.
Reasons to avoid
- This is the flange only, not the full chute bucket
- Fits the MTD and Troy-Bilt family, not Murray or Husqvarna models
What to look for
Compatibility comes first
A chute is a fitment part, so the replaces-part-number and compatible-model lists matter more than anything else. Locate the OEM number on your old chute or in the manual and confirm it appears before you buy.
Match the brand family
These replacements split into families: Murray and Craftsman, Husqvarna and Poulan, and MTD and Troy-Bilt. A chute made for one family will not bolt onto another, so start by identifying which family your machine belongs to.
Full assembly or just a part
Some listings are complete discharge chute assemblies, one adds the worm gear and rotation bracket, and another is only the mounting flange. Buy the scope that matches what actually broke on your machine.
Rotation and aiming hardware
If your chute will no longer swivel to aim snow, the worm gear or bracket is likely the culprit. A kit that bundles the chute with that hardware fixes both problems in a single install.
Cold-weather durability
Chutes take repeated impacts from packed snow and ice. Reinforced or metal-topped designs, as several listings describe, hold up better than thin plastic in freezing conditions.
Installation and spares
Look for listings with clear bolt-on instructions to avoid stripped hardware. A multi-pack of flanges is handy because that mounting point tends to wear or crack in the same place.
Our verdict
If you need to replace a broken discharge chute, the 762222MA chute assembly for Briggs & Stratton, Craftsman, and Murray throwers is the pick to check first. Its long compatibility list covers many two-stage models, so match your part number before buying.
FAQs
Find the OEM part number stamped on your existing chute or listed in your owner's manual, then match it to the replaces-part-number field on the listing. Also confirm your machine's model number appears on the compatible-models list, since chutes are brand and model specific.
No. These replacements are grouped by family, such as Murray and Craftsman, Husqvarna and Poulan, or MTD and Troy-Bilt. A chute designed for one brand family will not fit another, so always buy within your machine's family.
Not necessarily. If the bucket is intact but it no longer swivels, the worm gear or rotation bracket is usually worn. A kit like the 762222MA assembly with worm bracket includes that hardware so you can restore aiming without guessing which piece failed.
The chute assembly is the full discharge bucket that throws the snow, while the flange is the mounting ring where the chute meets the housing. Check which piece is actually damaged on your machine so you order the right one.
In most cases yes. These are bolt-on parts, and some listings include tips like securing the bolt while you remove the nut so it does not fall inside the housing. Basic hand tools and matching the correct part number are usually all you need.