Quick verdict
A 100 foot jetter hose rated to 5,800 psi with a rotating nozzle that fires jets backward to pull itself along a drain and blast grease, silt and roots off the pipe walls, plus an M22 to 1/4 inch NPT coupler to fit a consumer pressure washer. Yard drains, downspout lines and french drains that a snake cannot clear open up with water pressure. The kit works best on 3 GPM or more and is not for pipes under 2 inches or for cast iron that is already failing.
Strengths
- Clears yard drains, downspout lines and sewers with a pressure washer
- Rotating nozzle pulls the hose along and scours the pipe
- A hundred feet reaches most residential lines
- Rated to 5800 psi, well above consumer washers
- Coupler included for M22 washers
Weaknesses
- Needs a washer flowing 3 GPM or more for good self-propulsion
- Not for pipes under 2 inches or fragile old pipe
- Can get stuck at tight bends; pull back and retry
The overall YardToolLab Score is out of 100. Section scores are out of 10.
Water Does What the Snake Cannot
A drain snake punches a hole through a blockage and leaves the grease and silt on the pipe walls to close in again. A jetter scours the walls clean with high-pressure water and flushes the debris out, and a pressure washer supplies the water. Zgqmcgy’s kit is 100 feet of 5,800 psi hose with a rotating nozzle whose rear jets pull it along the pipe, and a coupler to fit M22 consumer washers.
This review is based on the listing specifications and on how pressure washer jetter kits perform in residential drains generally. We have not used this kit ourselves and the brand is a generic importer.
How It Works
Feed the nozzle a few feet into the drain, start the washer and pull the trigger. The backward jets thrust the hose forward and blast the pipe walls, and a forward jet breaks what is ahead. Feed hose as it pulls, and when it stops at a blockage, work it back and forth until it passes. Pull the hose out slowly with the water running to scour on the way back. Debris flushes out of the pipe behind you.
Flow Matters
Thrust and scouring come from volume. A 3 GPM gas washer propels the hose through 100 feet and clears heavy grease; a 1.5 GPM electric crawls and cleans lightly. The 5,800 psi rating on the hose is far above any consumer washer and is a durability margin, not a requirement.
What It Clears
Yard drains full of silt and leaves, downspout lines choked with shingle grit, french drains that have slowed, kitchen lines coated in grease, and residential sewers with light root hair. Thick roots want a cutter; a collapsed or offset pipe wants a camera and a shovel.
Safety
The jets cut skin and clothing. Never run the washer with the nozzle outside the pipe, keep hands clear of the entry while it runs, and wear eye protection against spray from the drain mouth.
Who Should Buy It
- Homeowners with yard drains that back up every autumn.
- Anyone with a gas pressure washer and a slow sewer line.
- Property managers maintaining several drains.
Common Owner Complaints
Weak propulsion on electric washers and hose stuck at tight bends. Use a gas washer; back off and retry at bends.
Care
Rinse the hose and nozzle with clean water after each use and let the hose drain before coiling, since sewer water left inside smells and corrodes the fittings. Check the nozzle jets for grit and clear them with a pin. Store the coil off the floor and out of sun.
Alternatives to Consider
A 50 foot jetter kit for short runs. A drum auger for solid obstructions. A plumber with a trailer jetter for main sewer lines.
Verdict
With a gas pressure washer, this kit cleans drains the way plumbers do for the price of one visit. Feed it in before starting, let the nozzle pull, and scour on the way out.
Full specifications
Zgqmcgy 100 Foot 5800 psi Sewer Jetter Kit for Pressure Washers with Rotating Nozzle FAQs
The nozzle fires most of its water backward. That thrust pulls the hose down the pipe and the jets scour the walls, pushing debris ahead and flushing it out. A small forward jet breaks blockages.
Weakly. Self-propulsion and scouring need flow, and 1.5 GPM electrics crawl. A 3 GPM gas washer pulls the hose confidently.
Grease, soap, silt, leaves and small roots in yard drains, downspout lines, french drains and residential sewers. It will not cut thick roots or move a collapsed pipe.
Never start the washer with the nozzle outside the pipe; the jets cut skin. Feed the nozzle a few feet in first, start, and keep hands clear of the hose entry.
