Quick verdict
A budget 1/4 inch by 50 foot pressure washer hose rated to 3600 PSI, with M22 ends using a 14/15 mm double O-ring and a five-piece stainless 3/8 inch quick-connect kit. It suits owners of electric and small gas washers who want more reach and the fittings in one box at the lowest sensible price. The caveat is that the maker names no material, no temperature range and no warranty, so treat it as a consumable.
Strengths
- 3600 PSI working rating covers electric and most residential gas washers
- M22 14/15 mm double O-ring ends aim to seal on either common gun size
- Stainless 3/8 inch quick-connect kit and M22 coupler included
- Soft, light hose that coils small and is easy to drag around
Weaknesses
- Hose material, weight and temperature range are not stated
- No warranty term given
- No bend restrictors described at the ends
- Very soft hoses can twist behind you under pressure
The overall YardToolLab Score is out of 100. Section scores are out of 10.
Who this hose is for
This is a budget 50 foot extension or replacement hose for a household electric or small gas pressure washer, sold with the fittings most people end up buying separately. VividWash lists M22 ends on both sides with a 14/15 mm double O-ring design meant to seal on either common M22 size, plus a stainless 3/8 inch quick-connect kit: two M22 14 mm female to 3/8 inch plugs, two M22 14 mm male to 3/8 inch sockets and one M22 male-to-male coupler. The hose is rated for a maximum working pressure of 3600 PSI.
This review is based on the maker’s published specifications and on recurring owner feedback. We have not run this product ourselves.
What you get
One 1/4 inch by 50 foot hose and the five-piece fitting kit. The maker describes a newly upgraded, very soft outer material and an inner tube designed to resist kinking when unrolled. No weight, no temperature range, no hot water rating and no warranty term are stated, and the material of the hose itself is not named beyond the marketing. The listing is clear on one thing worth repeating: this is a pressure hose, not a garden hose, and must not be connected to a faucet. The maker promises support within 24 hours, which is the only service commitment given.
Flexibility and handling
A soft, light hose is pleasant to drag around a patio and coils small for a shelf. The flip side, common to very soft budget pressure hoses, is that they can twist on themselves behind you when the gun is turned, and that summer softness can turn stiff in a cold garage. The anti-kink claim refers to the hose when unrolled and straightened; a tight loop under pressure will still fold any 1/4 inch hose. The maker’s soft-as-cotton-thread line is best read as softer than the stock hose, which for most electric washers is true and welcome.
Pressure rating and fittings
A 3600 PSI rating covers every electric washer and most residential gas machines. The 14/15 mm double O-ring end is the more interesting part: M22 fittings come in two inner sizes, and a mismatch is the single most common reason a replacement hose drips. A seal designed to work on both saves the adapter hunt, though owners of dual-size fittings across brands report it works better on some guns than others, so keep the stock hose until you have checked for leaks. The quick-connect kit is stainless steel per the maker and lets the hose feed a 3/8 inch quick-connect gun or pump outlet. The coupler joins it to a stock hose as an extension, with the lower-rated hose setting the limit.
Durability
With no named material and no warranty, the honest position is that this is a consumable at a consumable price. The usual failure points on hoses in this class are a seep at the crimp after a season and a pinhole where the hose was repeatedly kinked at the gun. Double O-rings help with the first. Nothing in the listing describes a bend restrictor at the ends, so keep the first foot at the gun straight. The stainless fittings in the kit should outlast the hose.
Living with it
Drain it after use, coil it loosely and store it above freezing. Replace O-rings when the seal starts to weep rather than overtightening the brass. Match the hose to the job: it is the right size for an electric or a 2.5 GPM gas washer and the wrong size for a 4 GPM machine, which wants a 3/8 inch hose for flow as much as pressure.
Alternatives to Consider
The Flexzilla 1/4 inch by 50 foot hose costs more and is rated lower at 3100 PSI, but it is US-made, cold-rated and backed by a known brand. The PWACCS 50 foot hose is a close budget competitor with a similar adapter set and a polyurethane jacket. The Simpson MorFlex 50 foot hose is the brand-name choice for gas washers near the top of this hose’s rating.
Verdict
Buy the VividWash 50 foot hose if you want the cheapest sensible way to add reach to an electric washer and you value getting the M22 coupler and 3/8 inch quick-connect fittings in the same box. Skip it if you want a stated material, a warranty or cold-weather flexibility, where the Flexzilla is worth the extra cost.
Full specifications
VividWash 1/4 Inch x 50 FT Pressure Washer Hose, 3600 PSI, M22 14/15mm, 3/8 Inch Quick Connect Kit FAQs
No. The maker is explicit that this is a pressure hose for the gun side of a pressure washer, not a water supply hose. Use a standard garden hose from the faucet to the pump inlet.
VividWash says the 14/15 mm double O-ring end is designed for both. Owners of dual-size fittings across brands report it works better on some guns than others, so check for drips before you retire the stock hose.
It converts the M22 ends to 3/8 inch quick connect: two female-to-plug pieces, two male-to-socket pieces and one M22 male-to-male coupler for joining the hose to a stock hose as an extension.
Karcher uses its own click-style fitting and the listing does not mention Karcher. You would need a Karcher-to-M22 adapter, sold separately.
