VEVOR 880 lb Riding Mower Lift Jack Review: Getting Under the Deck Safely

Working Under a Rider Without Fear

Changing the blades on a riding mower means getting under the deck, and the usual methods, a floor jack under the frame or ramps and a prayer, put several hundred pounds above you on a point load. A mower lift cradles both front wheels and raises the whole front of the machine, then locks. VEVOR’s is carbon steel rated to 880 pounds, telescopic to fit tyres up to 39.5 inches apart, raised by hand crank or a drill on the drive socket.

This review is based on the maker’s specifications and on how wheel cradle mower lifts are used generally. We have not used this lift ourselves.

Using It

Set the lift on a flat hard floor, roll the mower until its tyres sit in the cradle, set the brake and pull the key. Crank, or chuck a drill on the drive socket and raise the mower in seconds until the deck is at a comfortable height. Engage the lock, chock the rear wheels and work. Lowering is the reverse.

Safety

The lift supports the mower at the wheels, where it was designed to carry its weight, and the lock holds it without relying on hydraulics. That is the difference between this and a floor jack under a deck lip. It is still heavy machinery overhead; chock the rear wheels and never rely on the jack alone for a long job.

Capacity

Eight hundred and eighty pounds covers almost every residential lawn tractor and most residential zero-turns. Commercial zero-turns and large garden tractors exceed it; check the manual and remember fuel and attachments add weight.

What It Enables

Blade sharpening and replacement, deck scraping, belt changes, spindle and pulley inspection, washing the underside. Jobs that were put off because getting under the mower was dangerous become routine.

Who Should Buy It

• Riding mower and zero-turn owners who do their own maintenance.
• Anyone who has used a floor jack under a deck and known it was wrong.
• Owners of several machines on a property.

Common Owner Complaints

Storage space and machines over the rating. It folds somewhat; check the weight first.

Setup Tips

Assemble the lift on the floor where it will be used and tighten every bolt fully before the first lift. Centre the mower in the cradle so both tyres bear evenly, and raise it only as high as the job needs; a lower deck is easier to work on and more stable. Keep the drill on low speed when lifting so the mechanism is not shocked at the top of travel.

Alternatives to Consider

MoJack lifts are the established brand at higher prices and capacities. Ramps raise the mower without cradling it. A dealer service is the hands-off option.

Verdict

If you maintain a riding mower, a wheel cradle lift is the safe way to get under it and this one is well priced for its capacity. Check your weight, lock it at height and the blade change becomes a ten-minute job.