Quick verdict
A five-stage aluminum telescoping wand the maker says reaches up to 24 feet, rated for washers to 4000 PSI, with a 3/8 inch quick-connect inlet and two adapters, an M22 14 mm outlet, three extension wands, a gutter cleaner, a brush head, five tips, a support belt, goggles and storage bags. It suits a two-story homeowner with a gas or strong electric washer who would rather fight a long pole than climb a ladder. The caveat is control at full extension, which is tiring on every wand this long.
Strengths
- Up to 24 feet of cleaning height per the maker, enough for most two-story gutters
- Lever locks on four adjustable sections are quicker than twist collars
- Complete kit: three extension wands, gutter cleaner, brush, five tips, belt, goggles, bags
- Rated for washers up to 4000 PSI
- M22 14 mm outlet accepts other M22 attachments
Weaknesses
- Hard to aim and tiring at full extension, like every wand this long
- Pole weight is not stated
- Nozzle orifice size and adapter sizes are not itemized
- No warranty term given
The overall YardToolLab Score is out of 100. Section scores are out of 10.
Who this wand is for
Second-story siding, soffits, fascia and gutters are the jobs that put homeowners on ladders with a pressure washer, which is a bad combination. A telescoping wand moves the nozzle up there while your feet stay on the lawn. The TOR kit is the long-reach version: a five-stage aluminum pole the maker says will clean up to 24 feet high, with a sealed spray gun, a 3/8 inch quick-connect inlet with two hose adapters, an M22 14 mm outlet for the three included extension wands and gutter cleaner, a brush head with jets, five nozzle tips, a support belt, goggles and storage bags. It is rated for washers up to 4000 PSI.
This review is based on the maker’s published specifications and on recurring owner feedback. We have not run this product ourselves.
What you get
The pole has four adjustable sections with lever locks, so you set a length and clamp it rather than twisting collars. The listing’s 24 foot figure is the cleaning height, which includes the user’s arm reach and the angled extension wand at the tip; the pole itself is shorter. Nozzle angles are described only as five tips with adjustable angles, so expect a standard color set without a stated orifice size. Pole weight is not given, which is the number most buyers want. Warranty is not stated.
Reach and control
The physics of a long wand are the whole story. A pressure washer pushes back on the nozzle, and that push acts on the far end of a lever you are holding at the near end. Owners of 18 to 24 foot wands across every brand report the same thing: the first 12 to 15 feet are manageable, and the last stretch to full extension is tiring, whippy and hard to aim, especially with a 0 or 15 degree tip and a gas washer near the 4000 PSI limit. The support belt in the box is not an accessory, it is the way the tool is meant to be used: clip the pole butt into it, lean back and steer. Plan on the full 24 feet for short bursts on a gable or a high gutter run, and on 12 to 18 feet for siding and soffits. A 25 or 40 degree tip at height is easier to control and kinder to siding than a narrow one.
Pressure rating and fittings
The 4000 PSI rating covers residential gas machines and all electrics. The inlet takes a 3/8 inch quick-connect plug, and the two adapters are included for the common M22 hose ends; which sizes they are is not itemized, so check your hose end against the product photos. Pressure at the tip drops a little through 24 feet of pole, which is one more reason the kit suits a gas washer better than a 1.5 GPM electric. The M22 14 mm outlet thread lets the gutter cleaner and extension wands swap quickly and also accepts other M22 attachments you may own.
Build quality
Aluminum sections with a padded grip are the standard for the class and keep the weight down relative to steel, though no aluminum pole is light at full extension. Lever locks are quicker than twist collars and easier to work with wet hands. The parts that fail first on budget telescoping wands, by recurring owner account, are the locks slipping under load and the gun trigger wearing, so treat them gently and do not over-extend the smallest section, which is the weakest. The goggles are a reminder that water, grit and gutter sludge come straight back down at you.
Living with it
Collapse and drain the pole after use so water does not sit in the sections, and dry the locks. Store it in the bags horizontally. Keep the pole well clear of overhead power lines; aluminum and water conduct, and a 24 foot pole reaches service drops. Clean gutters with the water running away from the downspout first, then toward it, and expect a shower of debris. Two people make the job faster: one on the wand, one spotting and moving the hose.
Alternatives to Consider
The VEVOR 21 foot telescoping wand is the closest competitor and adds a chest-strap harness and a pivoting coupler for a similar outlay. The Simpson 18 foot telescoping wand gives up reach for a brand name and simpler parts support. For gutters alone, a short gutter cleaner attachment on your standard wand plus an extension lance reaches a single-story roofline with far less effort.
Verdict
Buy the TOR 24 foot kit if you have a two-story house, a gas or strong electric washer, and you would rather fight a long pole than climb a ladder; the belt, brush and gutter cleaner make it a complete set. Skip it if your house is single-story, where a shorter wand is easier to control, or if the missing weight figure and warranty matter to you.
Full specifications
TOR 24 FT Telescoping Pressure Washer Wand with Gutter Cleaner, 3 Extension Wands, 5 Nozzles and Brush FAQs
The maker does not state a weight. Aluminum five-stage wands of this length are typically a two-handed tool at full extension, which is why the support belt is included and should be used.
The 24 foot figure is cleaning height with the pole, your reach and the angled wand combined. Most two-story gutters sit well under that, so yes, with some margin for a steep lot.
Yes, through the 3/8 inch quick-connect inlet and the included adapters. Expect a little less punch at the tip than at ground level, since 24 feet of pole and an angled wand cost some pressure.
You can, but a brush at 24 feet is awkward to press against siding. It is most useful at 10 to 15 feet for soffits and upper siding, with the belt taking the weight.
