Quick verdict
A cover-only product for an 8-foot firewood rack: 96 by 24 by 42 inches in 600D Oxford with PU and PVC coatings, two downward air vents, bottom buckle straps, an elastic drawstring and a hook-and-loop opening on the left side. It suits anyone whose bundled rack cover has torn or who bought a bare 8-foot rack. The caveats are that no rack is included, the 42-inch height leaves the bottom of a 48-inch rack open by design, and the side opening is on the left only.
Strengths
- 600D Oxford fabric with PU and PVC coatings
- Two downward vents to stop condensation and ballooning
- Buckle straps and drawstring hold it in wind
- Hook-and-loop side opening for access without removing the cover
- Handles on both sides for quick on and off
Weaknesses
- Cover only; no rack included
- Access opening is on the left side only
- Sized for 96 x 24 x 42 inch racks; check your rack before buying
- Lighter racks can still move under a wind-loaded cover
The overall YardToolLab Score is out of 100. Section scores are out of 10.
Who this cover is for
Most 8-foot firewood racks arrive with a thin cover that lasts one winter, if they arrive with one at all. The Amagabeli 8 ft firewood rack cover is the replacement: a 96 by 24 by 42 inch sleeve in 600D Oxford fabric with PU and PVC coatings, two downward vents, buckle straps, a drawstring and a hook-and-loop opening on the left side so you can pull wood without unbuckling anything. It suits anyone with a bare or badly covered 8-foot rack, and it appears to match the cover Amagabeli bundles with its own 8-foot rack.
This review is based on the maker’s published specifications and on recurring owner feedback. We have not run this product ourselves.
What you get
The cover only. No rack, no poles, no hardware. It is cut to 96 inches long, 24 inches wide and 42 inches tall, which the maker says fits 8-foot firewood racks precisely. The fabric is 600D Oxford with a dual PU and PVC coating that Amagabeli describes as waterproof and resistant to cracking in heat and brittleness in cold. There are two downward air vents, bottom nylon buckle straps, an elastic drawstring hem, a hook-and-loop opening on the left side and handles on both sides. The color is black. No warranty term is stated.
Fit and what it covers
Measure your rack before buying. The cover suits a rack about 96 inches long and up to 24 inches wide, and because it is 42 inches tall it sits over the top of a standard 48-inch rack and leaves the bottom 6 inches open. That is intentional: the open base lets air through the stack so the wood keeps seasoning rather than sweating under plastic, while the top and sides keep rain and snow off. A rack narrower than 24 inches will have slack at the sides, which the drawstring and straps take up. If your rack is 4 feet or 12 feet long, this is the wrong size.
Materials and weather resistance
Six-hundred-denier Oxford is the fabric used on better grill and furniture covers, and with a PU outer and PVC inner coating it sheds water rather than soaking through the way bundled polyethylene covers do. The two downward-facing vents do two jobs: they let moist air out of the stack and they stop the cover from ballooning and lifting in gusts. Owners of covers in this class report that black fabric fades toward gray over a few summers in full sun and that the hook-and-loop strip is the first part to weaken; neither affects how well it keeps rain off.
Straps, access and daily use
The bottom buckle straps run under the rack and clip, the drawstring cinches the hem, and together they hold the cover through strong wind per the maker. Set the rack so the left-side opening faces the door you fetch wood from; the opening is on one side only, and turning the cover around puts the opening at the back. The handles on both ends make it a one-person job to lift the cover off for a summer airing and drop it back on in fall. Brush off leaves and pollen rather than scrubbing, and let it dry before folding it for storage.
Living with it
A cover is only as useful as the rack under it. On a light rack, a fully strapped cover acts as a sail, so stake or weight the rack legs if the spot is exposed. Keep the stack below the top rail so the cover sits flat and water runs off rather than pooling in a dip. Expect two to three winters of service in a sunny spot, more under an eave.
Alternatives to Consider
The ShelterLogic universal 8 ft firewood rack cover is the other widely sold replacement, with a similar heavy fabric and a full-length front flap. The Sunnydaze 8 ft log rack cover is a budget option in lighter fabric. If you have no rack yet, the Amagabeli 8 ft rack and cover combo includes this style of cover with a powder-coated steel frame.
Verdict
Buy the Amagabeli 8 ft firewood rack cover if you own a 96-inch rack, want a heavier fabric than the bundled cover, and like pulling wood through a side opening without undoing straps. Skip it if your rack is a different length, you want the access flap on the right or across the front, or you still need the rack itself, in which case the combo is the better buy.
Full specifications
Amagabeli Garden and Home 8ft Firewood Rack Cover, Waterproof 600D Oxford, Black FAQs
It measures 96 by 24 by 42 inches and is cut for 8-foot racks. Measure your rack: a 4-foot or 12-foot rack needs a different cover, and a rack narrower than 24 inches will have slack at the sides.
No. This listing is the cover only. Amagabeli sells the same style of cover bundled with an 8-foot steel rack as a separate listing.
The hook-and-loop opening is on the left side only. Position the rack so that side faces the door you carry wood through.
The 600D Oxford with PU and PVC coatings sheds rain and snow per the maker, and the two vents stop condensation inside. The bottom 6 inches of a 48-inch rack stay open by design so the wood keeps breathing.
