Quick verdict
For most DeWalt owners the HXKDJ 90629314 sheath is the one to grab. It replaces the factory part 90629314, fits the DCHT820B and DCHT820P1 Type 1 trimmers, and its impact-resistant snug-fit design covers the blades against rust, debris and accidental cuts during storage or transport.
HXKDJ 90629314 Hedge Trimmer Sheath
This sheath is a direct replacement for DeWalt part 90629314 and fits the DCHT820B and DCHT820P1 Type 1 trimmers, so it drops onto the common DeWalt and Black+Decker platform. The impact-resistant material shields the blades from dust, debris and rust in storage or transport. The snug-fit design is made to slip on and off without sliding loose while you carry the tool.
Check price on Amazon →The best hedge trimmer cover picks compared by fit and blade protection. DeWalt part 90629314 sheaths and Echo scabbards, so you store and carry your trimmer
Why you should trust this guide
A hedge trimmer cover looks like a trivial purchase until you realize that ordering the wrong one leaves your blades exposed and your fingers at risk. These covers are molded to specific trimmers, so the whole game is matching the sheath to your machine. My goal here is to steer DeWalt owners and Echo owners to the correct part rather than a generic cover that will not seat properly.
I do not sell these covers and I have no reason to push one over another. Every pick below is judged on the fit information and protection claims the makers state, then sorted by the trimmer families they serve. When a listing is thin, as some of the Echo scabbards are, I say so and lean on the model numbers in the title to confirm fit.
How we evaluated
Fit came first because a cover that does not match your trimmer is useless. I read the stated part numbers and compatible models for each cover and grouped them, keeping the DeWalt DCHT820 sheaths separate from the Echo HC-150 scabbards so you are never comparing the wrong accessory. I also noted single versus multi-pack options for anyone who wants a spare.
After fit I looked at the protection and build claims, favoring covers described as impact-resistant with a snug hold that will not slide off in transit. I did not physically fit these to a trimmer or test them in a shed. Instead I compared the published material claims and fitment data, and I flag the listings that provide too little detail to confirm anything beyond the model list.
What to look for
- Exact model and part-number match to your trimmer, since covers are not universal
- Whether it replaces a factory part number like 90629314 for a guaranteed fit
- Material, with impact-resistant plastic or PVC preferred over thin flimsy shells
- A snug, secure hold that stays put during carrying and transport
- Length, so the cover fully spans your blade rather than leaving a tip exposed
- Single versus multi-pack, if you own more than one trimmer or want a backup
- Whether the cover lets you hang the tool safely without gripping the blades
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| HXKDJ 90629314 Hedge Trimmer Sheath | Best Overall | Check price | |
| Anlvxin 90629314 Hedge Trimmer Sheath | Best Value | Check price | |
| X495000231 Echo Hedge Trimmer Blade Scabbard Cover Fits HC | Best Premium | Check price | |
| 2 Pack X495000480 Echo Hedge Trimmer Blade Scabbard Cover Fi | Best Budget | Check price | |
| 90629314 Hedge Trimmer Sheath fit | Also Great | Check price |
The picks, reviewed
HXKDJ 90629314 Hedge Trimmer Sheath
This sheath is a direct replacement for DeWalt part 90629314 and fits the DCHT820B and DCHT820P1 Type 1 trimmers, so it drops onto the common DeWalt and Black+Decker platform. The impact-resistant material shields the blades from dust, debris and rust in storage or transport. The snug-fit design is made to slip on and off without sliding loose while you carry the tool.
Reasons to buy
- Precise Compatibility: Compatible with for DeWalt DCHT820B Type 1 and DCHT820P1 Type 1 mod
- Reliable Blade Protection: Crafted from durable, impact-resistant material, this black she
- Secure & Easy to Use: Ergonomic snug-fit design allows effortless slipping on/off without
- Premium Quality & Durability: Meets high quality standards, offers grade performance at a
- Versatile Application: Ideal for garage storage, shed organization, and job site transport
Reasons to avoid
- Fits only the listed DCHT820 Type 1 models, so confirm your part number
- Single sheath, no spare in the box
Anlvxin 90629314 Hedge Trimmer Sheath
The Anlvxin covers the same DeWalt DCHT820B and DCHT820P1 Type 1 trimmers using part 90629314, but its listing is refreshingly plain about what it is. It states hard plastic construction that is not flimsy and about 22 inches of length, and it makes the safety point that without a cover you cannot hang the trimmer without gripping the blades. That makes it the honest value pick.
Reasons to buy
- part# 90629314
- Protect blades and easier to store,And protect your fingers.
- If Your hedge trimmer doesn’t come with one, making it unsafe for you fingers. Can’t hang
- It’s made of hard plastic so it’s not flimsy. Length about 22 inches.
- This part is compatible with the following: DCHT820B Type 1, DCHT820P1 Type 1
Reasons to avoid
- Basic listing with few extra details
- Same narrow DCHT820 fitment as the top pick
X495000231 Echo Hedge Trimmer Blade Scabbard Cover Fits HC
This is the answer for Echo owners rather than DeWalt owners, since the X495000231 scabbard is made to fit the Echo HC-150, HC-151, HC-152 and HC-155 hedge trimmers. If you run one of those Echo machines, a purpose-made scabbard is the correct match instead of forcing a DeWalt sheath. It covers the blade for safe storage and carrying.
Reasons to avoid
- Listing carries no feature detail, so verify exact fit from the model list
- Single scabbard only
2 Pack X495000480 Echo Hedge Trimmer Blade Scabbard Cover Fi
This two-pack of X495000480 scabbards also targets the Echo HC-150 series, including the HC-150i, and gives you a spare or a second cover for a backup trimmer. Buying the pair is the budget-smart move if you own more than one Echo unit or simply want a replacement on hand. Each covers the blade against knocks and accidental contact.
Reasons to avoid
- No published feature detail beyond the fitment list
- Only useful if you run the Echo HC-150 series
90629314 Hedge Trimmer Sheath fit
This alternative DeWalt sheath again replaces part 90629314 for the DCHT820B and DCHT820P1 Type 1, and it specifically calls out impact-resistant PVC and weather resistance. It stresses that shielding the cutting edge from hard knocks helps preserve sharpness and extend blade life. It is a solid backup choice if the top DeWalt pick is unavailable.
Reasons to buy
- Precise Compatibility: Used for Compatible with for DeWalt DCHT820B Type 1 and DCHT820P1 T
- Rugged & Weather-Resistant: By material durable, impact-resistant PVC material,material, t
- Secure & Easy to Use: This heavy-duty sheath completely covers the sharp trimmer during st
- Premium Quality & Durability: By shielding the cutting edges from accidental impacts with
- Maintain blade sharpness
Reasons to avoid
- Same limited DCHT820 Type 1 compatibility
- Overlaps heavily with the other DeWalt sheaths here
What to look for
Model match
Confirm the cover lists your exact trimmer model and part number before buying, since fit is molded in.
Part number
Covers that replace a factory part like 90629314 take the guesswork out of DeWalt fitment.
Material
Impact-resistant plastic or PVC protects better and lasts longer than a thin flimsy shell.
Secure fit
A snug hold keeps the cover from sliding off while you carry or transport the trimmer.
Coverage length
Make sure the cover spans the full blade so no sharp tip is left exposed.
Our verdict
For most DeWalt owners the HXKDJ 90629314 sheath is the one to grab. It replaces the factory part 90629314, fits the DCHT820B and DCHT820P1 Type 1 trimmers, and its impact-resistant snug-fit design covers the blades against rust, debris and accidental cuts during storage or transport.
FAQs
Check your trimmer model number and match it to the cover listing. DeWalt DCHT820 owners want a 90629314 sheath, while Echo HC-150 series owners need an Echo scabbard.
It protects the sharp edges from knocks and rust, and it lets you hang or carry the trimmer without gripping the blades, which is a real safety benefit.
Hard impact-resistant plastic or PVC resists dents and holds its shape, which protects the edge better than a thin flexible sleeve during storage and transport.
No. These covers are molded to specific machines, so a DeWalt 90629314 sheath will not seat on an Echo HC-150. Buy the cover listed for your brand and model.
A single is fine for one trimmer. Choose the two-pack if you own more than one machine or want a spare on hand in case one is misplaced.