Quick verdict
For most MTD-family snow blowers, the KINTLE 490-241-0038 universal rolling skid shoes are my pick. They fit machines with 2-3/4 and 3 inch bolt centers, roll instead of drag so they protect the surface, and the maker rates them for use in temperatures well below freezing.
KINTLE 490
These KINTLE rolling skid shoes fit machines with 2-3/4 and 3 inch bolt centers, covering many MTD-family two and three-stage throwers. The roller design means they roll along the ground rather than dragging like fixed steel or plastic skids, which protects driveways and sidewalks from scuffing and makes the blower easier to maneuver. The kit includes two shoes, washers and bolt sets, and the maker lists a long compatibility list plus cold-weather performance to about 30 below zero.
Check price on Amazon →The best snow blower skid shoes compared: rolling and slide-style polyurethane sets for MTD, Craftsman and Cub Cadet blowers that protect driveways from
Why you should trust this guide
I put this guide together by reading each skid shoe listing carefully and paying attention to the one thing that matters most in this category: the exact fitment. Snow blower skid shoes come in specific bolt patterns like 490-241-0038 and 490-241-0010, and buying the wrong one means it simply will not bolt to your machine. So I sorted these by their fitment and compatible models rather than treating them as interchangeable.
I have not installed each of these sets on a range of blowers and worn them down over seasons, and I am not going to pretend I did. What I can do is compare the materials, the roller versus slide designs, and the compatibility lists honestly, and point you toward identifying your machine’s part number first. For a replacement part like this, matching the fitment is the whole job.
How we evaluated
My primary criterion was fitment, because a skid shoe that does not match your bolt spacing is useless no matter how good it is. I noted which sets use the 490-241-0038 pattern with 2-3/4 and 3 inch bolt centers and which use the 490-241-0010 pattern, and I flagged where a listing warns that hole spacing can vary and may need drilling.
After fitment, I compared material and design. Polyurethane resists wear and cold better than plastic and protects surfaces, and a rolling design reduces dragging and scuffing compared with a fixed slide shoe. I also checked whether each kit includes complete hardware, since a set that ships with all the bolts, washers and clips makes for a much easier install.
What to look for
- Bolt pattern: Confirm whether your machine needs the 490-241-0038 or 490-241-0010 fitment before anything else.
- Model compatibility: Check the listing’s compatible-model list against your exact snow blower.
- Roller vs slide: Rolling shoes reduce dragging and protect surfaces, while slide shoes are simpler with fewer moving parts.
- Material: Polyurethane resists wear, corrosion and cold better than basic plastic and is gentler on surfaces than steel.
- Included hardware: A complete kit with bolts, washers and clips makes installation quick and avoids extra trips.
- Cold rating: Look for materials rated for deep-freeze temperatures so they stay durable in winter.
- Drill-friendliness: Some sets note hole spacing may vary by batch, so an easy-to-drill material helps fine-tune fit.
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| KINTLE 490 | Best Overall | Check price | |
| 490 | Best Value | Check price | |
| Universal Roller Skid Snow Thrower Shoes | 490 | Best Premium | Check price | |
| 2 Pcs 490 | Best Budget | Check price | |
| HPENP 490 | Also Great | Check price |
The picks, reviewed
KINTLE 490
These KINTLE rolling skid shoes fit machines with 2-3/4 and 3 inch bolt centers, covering many MTD-family two and three-stage throwers. The roller design means they roll along the ground rather than dragging like fixed steel or plastic skids, which protects driveways and sidewalks from scuffing and makes the blower easier to maneuver. The kit includes two shoes, washers and bolt sets, and the maker lists a long compatibility list plus cold-weather performance to about 30 below zero.
Reasons to buy
- Fits machines with 2-3/4" and 3" bolt centers.Fits many brands of two-stage and three-stag
- Product Includes: 2 X Universal Roller Skid Snow Thrower Shoes (roller wheel outside diame
- Compatible with Craftsman, Troy-Bilt, Cub Cadet, Ariens, MTD, MTD Pro, Yard Machines, and
- Compatible with MTD Models: 31AH64EG700, 31AH64FG700, 31AH64FG795, 31AH65FH700, 31AH65FH78
- Will not wear down like fixed steel or plastic skids, Protects surfaces from scuffing and
Reasons to avoid
- These fit the 490-241-0038 pattern, so they will not suit machines needing a different bolt spacing
- As rolling shoes with moving parts, they have more to wear out than a simple fixed skid
490
This set is a direct OEM-style replacement for the MTD 490-241-0010 skid shoes, made from heavy-duty polyurethane to resist wear, corrosion and cold. It fits specific MTD, Troy-Bilt and Yard Machines models, and the kit includes both shoes plus all screws, nuts, washers and clips for a complete install. Polyurethane glides over driveways and decks to prevent scratching while improving control in icy conditions.
Reasons to buy
- ✔️Replaces MTD 490-241-0010 Skid Shoes Direct OEM-style replacement for MTD 490-241-0010;
- ✔️Durable Polyurethane Construction Made with heavy-duty polyurethane to resist wear, corr
- ✔️Fits Specific MTD/Troy-Bilt/Yard Machines Models Compatible with MTD 31AH65LG704 (2009),
- ✔️Complete Kit with Mounting Hardware Includes 2 skid shoes + all required screws, nuts, w
- ✔️Protects Surfaces & Improves Maneuverability Glides smoothly over driveways, sidewalks,
Reasons to avoid
- This matches the 490-241-0010 fitment, which is different from the 0038 rolling shoes
- These are slide-style shoes, so they do not roll like the KINTLE set
Universal Roller Skid Snow Thrower Shoes | 490
These Universal Roller skid shoes match the 490-241-0038 pattern for 2-3/4 inch slot and 3 inch bolt centers and fit most Craftsman, MTD and Cub Cadet two and three-stage throwers. They are made of durable polyurethane that is cold-resistant, and the roller design improves maneuverability while protecting driveways and porches from scratches. The maker notes the material is easy to drill if a slight hole adjustment is needed for your machine.
Reasons to buy
- Suitable Size Model: 2-3/4" slot and 3" bolt centers.Snow Blower Skid Shoes. NOTE!!! Due t
- Wide Range of Application: Craftsman, MTD, Cub Cadet A-riens most 2-stage and 3-stage snow
- Compatible with Craftsman, Troy Bilt, Cub Cadet, A-riens, MTD, MTD Pro, Yard Machines, Hus
- Durable Materials: 490-241-0038 Snow Blower Skid Shoes are made of durable polyurethane ma
- NOTE: Due to different batches of product, the hole distance may vary slightly. If you fin
Reasons to avoid
- The listing warns hole spacing can vary by batch and may need drilling to fit
- Like the other 0038 sets, it is tied to that bolt pattern rather than universal to all blowers
2 Pcs 490
This 2 Pcs kit is another 490-241-0038 rolling skid shoe set with plastic wheels, fitting most two and three-stage snowblowers with 2-3/4 and 3 inch bolt centers across Craftsman, MTD and Cub Cadet. It comes as a complete package with the shoes, wheels, a hardware kit of washers, bolts and nuts, and a wrench for installation. The premium polyurethane is rated for wear resistance in extreme cold down to about minus 30 Celsius.
Reasons to buy
- Replaces Part Number / Alternative model: 490-241-0038
- Product Information: Product included 2x 490-241-0038 Roller Skid Shoes, 2x Plastic Wheels
- Rolling Skid Shoes Fit most 2-stage and 3-stage snowblowers with 2-3/4" and 3" bolt center
- Also Compatible With 31AH64EG700, 31AH64FG700, 31AH65FH700, 31AM63FF752, 31AS63EE700, 31AS
- Superior Quality: The Rolling Skid Shoes are crafted from premium polyurethane material, m
Reasons to avoid
- It shares the 0038 fitment, so it is not a fit for machines needing other bolt spacing
- The included plastic wheels are a wear item that will eventually need attention
HPENP 490
The HPENP set is a 490-241-0010 slide-style skid shoe kit with mounting hardware for universal MTD snow throwers. The listing details specific fitment across MTD, Yard Machines and Troy-Bilt models by part number and year, which makes it easy to confirm your machine is covered. It comes as a two-pack with the hardware needed to install.
Reasons to buy
- Slide Skid Shoes Fits for MTD 31AH65LG704 (2009),31BM63LF704 (2009),31AM62EE706 (2009),31B
- Anti-Skid Shoes Fits for Yard Machines 31AH64EG700 (2014), 31AH64EG700 (2009), 31AH64FG700
- Skid Shoes Fits for Troy-Bilt 31BM63P3 (2009),31AH55Q5 (2009), 31AH64Q4 (2009), 31AM62N2 (
- Set of Universal Skid Shoes for Most 2- Stage Snow Blowers, Hardware is Included
Reasons to avoid
- This is the 490-241-0010 fitment, so verify your machine uses that pattern before buying
- As slide shoes they drag rather than roll, so they wear differently from rolling shoes
What to look for
Fitment and part number
This is the whole ballgame. Skid shoes are made for specific bolt patterns like 490-241-0038 or 490-241-0010. Find your machine's part number or measure the bolt spacing first, because the wrong pattern will not mount at all.
Roller vs slide design
Rolling skid shoes roll along the ground to reduce dragging and protect driveways from scuffing, and they ease maneuvering. Slide shoes are simpler with no moving parts. Decide whether smoother handling or fewer wear parts matters more to you.
Material durability
Polyurethane resists wear, corrosion and cold far better than basic plastic, and it is gentler on surfaces than fixed steel skids. Look for a cold rating so the shoes stay tough through deep-winter use.
Complete hardware
A kit that ships with all the bolts, washers, nuts and clips, and sometimes a wrench, saves you a trip to the hardware store. Confirm the set includes everything you need to install both shoes.
Fit adjustability
Some listings note that hole spacing can vary slightly by batch and may need drilling. A material that is easy to drill, like polyurethane, lets you fine-tune the fit if your machine's spacing is slightly off.
Our verdict
For most MTD-family snow blowers, the KINTLE 490-241-0038 universal rolling skid shoes are my pick. They fit machines with 2-3/4 and 3 inch bolt centers, roll instead of drag so they protect the surface, and the maker rates them for use in temperatures well below freezing.
FAQs
Find your machine's skid shoe part number, often 490-241-0038 or 490-241-0010 on MTD-family blowers, or measure the bolt center spacing. Then match a set with the same fitment and check your model against the listing's compatible-model list.
Rolling skid shoes have a wheel or roller that rolls along the ground, reducing dragging and protecting the surface while making the blower easier to move. Slide shoes are fixed pads that drag along. Rolling shoes maneuver more smoothly but have more parts to wear.
Polyurethane resists wear, corrosion and cold better than basic plastic and is much gentler on driveways, decks and sidewalks than fixed steel skids that can scuff. Several sets here rate their polyurethane for use well below freezing.
Most of these kits include the necessary bolts, washers, nuts and clips, and some add a wrench. It is worth confirming in the listing, since a complete hardware kit means you can install both shoes without a separate trip for parts.
Some listings note that hole spacing can vary slightly between production batches. Because polyurethane and nylon are easy to drill, you can often adjust a hole to match your machine's bolt spacing if it is slightly off, though matching the correct pattern first is always best.