Quick verdict
For most driveways the WarmlyYours 2x15 ft 120V PowerMat is the pick I keep coming back to. It runs on a standard 120V circuit, installs under asphalt, concrete or pavers, and its 50W per square foot output clears tire tracks without you touching a shovel.
WarmlyYours 2x15 ft. Electric Ice and Snow Melting Mat 120V
This 15 ft mat runs on a standard 120V, 12.5A circuit and puts out 1500W across 30 square feet at 50W per square foot, which is enough to keep a pair of tire tracks clear. It embeds under asphalt, concrete or pavers with a twin-conductor heating cable, and it is CSA certified with a 10-year limited warranty. The 20 ft cold lead gives you room to reach a connection point.
The best electric heated driveway mat options compared: embedded 120V and 240V snow melting PowerMats that clear tire tracks and walkways without shoveling.
Why you should trust this guide
I built this guide by working through the actual product listings for each WarmlyYours PowerMat, pulling the voltage, wattage, coverage area and heat output straight from the manufacturer specs rather than repeating marketing lines. Every size in this lineup shares the same core design, so the real decision comes down to circuit type and how much area you need to cover, and that is what I focused on separating out.
I have not buried a heating mat under my own driveway, and I will not pretend otherwise. What I can do is read the specs carefully, compare the sizes fairly, and point out where a mat’s shape or voltage makes it a good or poor fit for a given job. Snow melting mats are an electrical install with real code requirements, so honesty about what each unit needs matters more than hype.
How we evaluated
My comparison focused on the numbers that actually change how a mat performs: voltage, amperage, total wattage, coverage in square feet, and the consistent 50W per square foot heat output across the line. I also weighed the cold lead length, the certification, and the warranty, since those determine how easy the mat is to wire in and how long you can expect it to last.
Just as important is fit to the job. A long narrow mat is wasted on a small landing, and a 120V mat cannot cover a full driveway alone. So I evaluated each size against the layout it suits best, and I flagged the electrical demands honestly because a 240V mat means a dedicated circuit and usually an electrician.
What to look for
- Voltage: 120V mats plug into a standard circuit more easily, while 240V mats deliver more power but need a dedicated circuit.
- Coverage area: Check the square footage and match it to whether you want tire tracks clear or a full-width surface.
- Mat shape: A long narrow strip suits a long approach, a wider mat suits a broad lane, so shape matters as much as total area.
- Heat output: Look at watts per square foot, since that drives melt rate more than total wattage.
- Certification and warranty: A CSA listing and a long limited warranty tell you the mat is built for outdoor embedded use.
- Cold lead length: A longer lead gives you flexibility in reaching your connection point without splicing.
- Code requirements: Fixed outdoor deicing typically requires ground fault protection, so plan the install around your local code.
How we test
We base every pick on real-world use, published manufacturer specifications and verified owner feedback. We compare the tools on the things that actually matter for your lawn, power, runtime, cut quality, build and value, and we never accept payment for a ranking. When we have not used a specific model first-hand, we say so.
The picks at a glance
| Tool | Best for | Score | |
|---|---|---|---|
| WarmlyYours 2x15 ft. Electric Ice and Snow Melting Mat 120V | Best Overall | Check price | |
| WarmlyYours 3x30 ft. Electric Ice and Snow Melting Mat 240V | Best Value | Check price | |
| WarmlyYours 2x50 ft. Electric Ice and Snow Melting Mat 240V | Best Premium | Check price | |
| WarmlyYours 2x40 ft. Electric Ice and Snow Melting Mat 240V | Best Budget | Check price | |
| WarmlyYours 2x10 ft. Electric Ice and Snow Melting Mat 240V | Also Great | Check price |
The picks, reviewed
WarmlyYours 2x15 ft. Electric Ice and Snow Melting Mat 120V
This 15 ft mat runs on a standard 120V, 12.5A circuit and puts out 1500W across 30 square feet at 50W per square foot, which is enough to keep a pair of tire tracks clear. It embeds under asphalt, concrete or pavers with a twin-conductor heating cable, and it is CSA certified with a 10-year limited warranty. The 20 ft cold lead gives you room to reach a connection point.
Reasons to buy
- Snow and Ice-Free Winters: The WarmlyYours electric heated snow melting mats melt snow and
- Embedded and Invisible Ice Melting: Heated snow mats for driveway installs under concrete,
- Safe and Reliable: CSA certified, the outdoor heated mat for snow removal mats features a
- Warranty & Support: WarmlyYours electric snow and ice melting mats come with a 10-year lim
- WarmlyYours Snow Melting PowerMat Specifications: 15 ft. long, 2 ft. wide, 120 V, 12.5 A,
Reasons to avoid
- This is a permanent embedded install that goes under your surface, so it is not something you roll out and put away
- At 120V and 30 square feet, one mat covers tire tracks rather than a full-width driveway
WarmlyYours 3x30 ft. Electric Ice and Snow Melting Mat 240V
The 3x30 ft version steps up to 240V and 4500W across 90 square feet, so it covers far more area per mat than the 120V unit while holding the same 50W per square foot output. The wider 3 ft path and longer 30 ft run make it a better match for a full driveway section. It shares the same twin-conductor cable, CSA listing and 10-year warranty.
Reasons to buy
- Snow and Ice-Free Winters: The WarmlyYours electric heated snow melting mats melt snow and
- Embedded and Invisible Ice Melting: Heated snow mats for driveway installs under concrete,
- Safe and Reliable: CSA certified, the outdoor heated mat for snow removal mats features a
- Warranty & Support: WarmlyYours electric snow and ice melting mats come with a 10-year lim
- WarmlyYours Snow Melting PowerMat Specifications: 30 ft. long, 3 ft. wide, 240 V, 18.75 A,
Reasons to avoid
- Needs a dedicated 240V circuit, which usually means an electrician
- At 18.75A it draws heavily, so you have to plan the circuit around it
WarmlyYours 2x50 ft. Electric Ice and Snow Melting Mat 240V
At 2x50 ft and 5009W on 240V, this is the largest mat here and covers 100 square feet in a single 50 ft strip. That long, narrow shape suits a long approach or a two-track layout down a lengthy drive. It keeps the 50W per square foot heat output and the same CSA certification and warranty as the rest of the line.
Reasons to buy
- Snow and Ice-Free Winters: The WarmlyYours electric heated snow melting mats melt snow and
- Embedded and Invisible Ice Melting: Heated snow mats for driveway installs under concrete,
- Safe and Reliable: CSA certified, the outdoor heated mat for snow removal mats features a
- Warranty & Support: WarmlyYours electric snow and ice melting mats come with a 10-year lim
- WarmlyYours Snow Melting PowerMat Specifications: 50 ft. long, 2 ft. wide, 240 V, 20.87 A,
Reasons to avoid
- The 50 ft length only helps if your layout is long and narrow, otherwise you are paying for shape you cannot use
- 240V, 20.87A install is the most demanding here on your electrical service
WarmlyYours 2x40 ft. Electric Ice and Snow Melting Mat 240V
The 2x40 ft 240V mat sits between the smaller and larger options at 4000W over 80 square feet in a 40 ft run. It is a reasonable middle size when 30 ft is too short but you do not need the full 50 ft strip. Output stays at 50W per square foot and it carries the same twin-conductor cable and 10-year warranty.
Reasons to buy
- Snow and Ice-Free Winters: The WarmlyYours electric heated snow melting mats melt snow and
- Embedded and Invisible Ice Melting: Heated snow mats for driveway installs under concrete,
- Safe and Reliable: CSA certified, the outdoor heated mat for snow removal mats features a
- Warranty & Support: WarmlyYours electric snow and ice melting mats come with a 10-year lim
- WarmlyYours Snow Melting PowerMat Specifications: 40 ft. long, 2 ft. wide, 240 V, 16.67 A,
Reasons to avoid
- Still a 240V embedded install, so it is not a plug-and-go option
- The 2 ft width means a single mat covers one track, not a full lane
WarmlyYours 2x10 ft. Electric Ice and Snow Melting Mat 240V
This 2x10 ft 240V mat is the smallest in the group at 1000W over 20 square feet. That makes it useful for a short entry, a landing, or a single stubborn ice spot rather than a whole driveway. It uses the same cable construction, CSA listing and warranty, so you are getting the same build in a compact size.
Reasons to buy
- Snow and Ice-Free Winters: The WarmlyYours electric heated snow melting mats melt snow and
- Embedded and Invisible Ice Melting: Heated snow mats for driveway installs under concrete,
- Safe and Reliable: CSA certified, the outdoor heated mat for snow removal mats features a
- Warranty & Support: WarmlyYours electric snow and ice melting mats come with a 10-year lim
- WarmlyYours Snow Melting PowerMat Specifications: 10 ft. long, 2 ft. wide, 240 V, 4.17 A,
Reasons to avoid
- 20 square feet is too little for a full driveway on its own
- Because it is 240V it needs the same circuit work as the big mats despite its small size
What to look for
Circuit type
Decide up front whether you are wiring to a standard 120V circuit or a dedicated 240V line. The 120V mat is the friendlier starting point, while the 240V mats deliver more coverage but demand more from your electrical service.
Coverage vs layout
Match the mat's square footage and shape to your driveway. Narrow strips cover tire tracks or long approaches, while wider mats suit broad lanes. Buying the wrong shape wastes coverage you cannot use.
Heat output
Every mat here runs at 50W per square foot, so melt rate is consistent across sizes. That means your choice is about area and voltage, not about one mat melting faster than another.
Installation reality
These are embedded systems that go under asphalt, concrete or pavers at a 3 to 4 inch depth. This is a permanent install, not a roll-out mat, so plan it during a resurfacing or new pour.
Code and safety
Fixed outdoor snow melting equipment generally requires ground fault protection under electrical code. Factor an electrician and code compliance into your budget before you commit.
Our verdict
For most driveways the WarmlyYours 2x15 ft 120V PowerMat is the pick I keep coming back to. It runs on a standard 120V circuit, installs under asphalt, concrete or pavers, and its 50W per square foot output clears tire tracks without you touching a shovel.
FAQs
The mats are designed to embed under asphalt, concrete or pavers, and the 240V versions need a dedicated circuit. Given the code requirements for ground fault protection on outdoor deicing equipment, most people will want a qualified electrician for the wiring even if they handle the surface work.
Usually not. The narrower mats are sized to clear tire tracks rather than a full-width lane. Many installs combine multiple mats for full coverage or target the two tire tracks where clearance matters most.
The 120V 2x15 ft mat runs on a standard circuit and covers 30 square feet, while the 240V mats cover more area per unit but need a dedicated 240V line. All of them share the same 50W per square foot heat output.
The listings put the heat output at 50W per square foot across the line, and the surface is designed to stay well above ambient temperature. I am reporting the spec here rather than a melt rate I measured myself.
Yes. These mats clear the area they cover, typically tire tracks or a walkway, so you may still need a shovel or blower for spots outside the mat footprint like the edges of a wide driveway.